High Efficiency Ultrafine Calcium Carbonate Coal Slag Cement Vertical Roller Mill Fine Powder Production Plant

Product Description

High Efficiency Ultrafine Calcium Carbonate  Coal  Slag Cement Vertical Roller Mill Fine Powder Production Plant

Product Description

SRM series vertical roller mill is a powder grinding equipment. This powder grinding plant integrates grinding, drying, grading and conveying, with simple structure and compact. It is used for grinding limestone, raw meal, slag, Nickel slag, manganese slag, cement, ground granulated blast-furnace slag, GGBS powder, fly ash, coal, clinker etc.

Baichy Raymond Mill Features

1. Low operation cost
(1) Low energy consumption: the grinding roller is used to directly roll and grind the materials on the grinding plate, which has low energy consumption and saves 30% ~ 40% energy consumption compared with the ball milling system.

(2) Less wear: because the grinding roller is not in direct contact with the grinding disc during work, and the grinding roller and lining plate are made of high-quality materials, it has long service life and less wear.

2. High grinding efficiency
The grinding force can be increased by hydraulic pressurization, which can increase the output and improve the grinding efficiency; At the same time, it is also equipped with a limiter device, which only grinds the materials to prevent the accidental contact of the grinding roller and grinding ring from causing the vibration and even wear of the equipment.

3. Convenient maintenance
By overhauling the oil cylinder, turning over the boom and replacing the roll sleeve and lining plate, it is convenient and fast to reduce the shutdown loss and save the labor cost.


 

 

Product Parameters

 

Model	Grinding table dia.(mm)	Max feeding size(mm)	Discharge size(um)	Discharge size(mesh)	Air-in tempreture(ºC)	Air-out tempreture(ºC)	Input material moisture	Final moisture	Capacity(t/h)	Motor Power(kw)
SRM1300	1300	≤38	212-45	70-325	≤350	70-95	4-15%	≤1%	10-35	185-250
SRM1500	1500	≤38	212-45	70-325	≤350	70-95	4-15%	≤1%	13-48	250-355
SRM1700	1300	≤38	212-45	70-325	≤350	70-95	4-15%	≤1%	18-68	355-600
SRM1900	1900	≤38	212-45	70-325	≤350	70-95	4-15%	≤1%	23-85	450-600
SRM2200	2200	≤38	212-45	70-325	≤350	70-95	4-15%	≤1%	36-135	710-1000

Working Principle

The SMR vertical roller mill is mainly composed of powder concentrator, grinding roller device, grinding disc device, pressurizing device, reducer, motor, shell, etc.

1. The separator is an efficient and energy-saving powder separation device.
2. The grinding roller is a component used to roll and crush materials.
3. The grinding disc is fixed on the output shaft of the reducer, which is the place where the grinding roller rolls materials.
4. The pressurization device is a component that provides grinding pressure for the grinding roller and provides sufficient pressure to the grinding roller to crush materials.
5. After being crushed by hammer crusher, the large material becomes smaller and is sent to the storage hopper by elevator, and evenly sent to the distribution board on the steering board through vibrating feeder and inclined feeding pipe. The grinding disc is driven by a motor through a reducer. The material falls from the feed opening onto the grinding plate. The material is driven to the edge of the disc by centrifugal force and crushed into fine powder by roller.
6. Then, the hot air of the nozzle converts the fine powder into efficient classification. The qualified powder is brought to the powder collector through air for collection, and the unqualified powder is sent back for regrinding.

Detailed Photos

Baichy is gradually expanding its business market depending on quality performance and service support. Through the international mining machinery exhibitions, professional equipment, technology and good service to customers in kinds of countries.

 

 

Baichy Heavy Industrial Machinery Co., Ltd. is a hi-tech, engineering group. We are specialized in the research, development, and production of stone crushing, powder grinding, mineral processing equipments and other related devices. Our products have been sold to 120 countries and areas of Southeast Asia, East Europe, South America, the Middle East and Africa etc, and more foreign markets will be promoted in future.

<<< Baichy Factory >>>
Headquarter of Baichy is located in Zhengzhou city, China and now we have two manufacturing bases as our strong support. One is located in Jiaozuo about 200,000 square meters, and the other is in Xingyang city, about 100,000 square meters.There are more than 200 sets of various large and medium-sized metal processing lathe, riveting machine, welding equipment and assembly equipment. 

FAQ

1. Are you manufacture or trading company?
We are factory, established in 2003.

2. How long is your delivery time?
7-10 days for the stock, 15-30 days for the mass production.

3. What is your payment method?
30% deposit in T/T advance, 70% balance before shipment.

4. How long is the warranty? Does your company supply the spare parts?
One year. Spare parts for you at lowest cost.

5. If I need the complete crushing plant can you help us to build it?
Yes, we can help you set up a complete production line and give you related professional advice. We had already build many mining projects in China & Overseas.