High Efficient River Sand Silica Sand Molding Sand Three-Pass Rotary Dryer for Sale

• Customization: Available
• Model: 1.0*10,1.2*12,1.5*12,1.8*14
• Object: Slag
• Model NO.: 1.8x14, 2.2x1.8, 1.0x10, 1.2x12, 2.4x20, 1.5x12
• Voltage: According to Requirements
• Drum diameter: 2000-4000mm
• Certification: CE
• Energy Saving: Energy Saving
• Warranty: 1 Year
• Color: According to Requirements
• Customized: Customized
• Condition: New
• After-sales Service: 1 Year
• Heating Source: Gas Coal Oil Electric Biomess
• Feature: High Efficiency Low Cost
• Application Material: Coal, Slurry, Quartz Sand, Silica Sand, Garnet San
• Product Keywords: Sand Dryer
• Noise: Low Noise Dry Oven
• Machine Type: High Temperature Indrect Dryer
• Volume: Accroding to Models
• Factory Visit: Welcome
• Transport Package: Outside Package: Sandard Export Wooden Cases Inner
• Specification: Feed Size: 4-10r/min
• Trademark: Baichy
• Origin: Jiaozuo, Henan
• HS Code: 8419399090
• Production Capacity: 150sets/Month
• Package Size: 180.00cm * 110.00cm * 150.00cm
• Package Gross Weight: 15000.000kg

Product Description

High Efficient River sand Silica Sand Molding Sand Three-pass Rotary Dryer for Sale

Product Description

Sand dryer is also known as the three pass drum dryer, three return cylinder dryer, on the basis of the single-cylinder dryer, developed and manufactured.

 

Three drum rotary dryer is mainly used for drying a certain humidity and size of granular materials, such as yellow sand used in dry powder and mortar, various specifications of sand used in a foundry industry blast, furnace slag used in building materials and cement industry, clay in a small size, small materials which have no chemical changes, resists high temperature and are with flyblown dust, used in chemical industry. In according with the request of materials and water in different industries, water in materials which are dried can be below 1%-0.5%.
 

And precisely monitor and control the materials temperature and effectively take advantage of heat.

 

The sand rotary dryer (river sand dryer)  equipment produced by our company adopt the saving technology ,fixed structure .    Internal cylinder ,middle cylinder and outer cylinder form a since the insulation structure .Special thermal design idea , the elimination of wind tunnel heat loss , increase the heat exchange area and unit volume evaporation intensity , good energy saving effect .The sand dryer is used for drying sand , yellow sand , slag , clay and other raw materials , widely used in building materials , chemical industry , foundry industry , etc , can adapt to a variety of fuels such as coal , oil and gas.

Our Advantages

1. The overall size of the dryer is reduced by more than 30% compared to ordinary single-cylinder rotary dryers, thereby reducing external heat loss.

2. The thermal efficiency of the self-insulating dryer is as high as 80% (compared to only 35% for the ordinary rotary dryer), and the thermal efficiency is 45% higher.

3. Due to the compact installation, the floor space is reduced by 50%, and the infrastructure cost is reduced by 60%

4. The temperature of the finished product after drying is about 60-70 degrees, so that it does not need an additional cooler for cooling.

Product Parameters

 

Model	Diameter of outer cylinder(m)	Length of outer cylinder (m)	Drum volume(m³)	Rotation speed(r/min)	Max. air flow temperature(ºC)	Production capacity(t/h)	Power(kw)
2.0*4m	2	4	12.56	4-10	700-750	8-15	5.5x2
2.2*5m	2.2	5	18.99	4-10	700-750	12-20	5.5x2
2.5*6m	2.5	6	29.43	4-10	700-750	18-28	7.5x2
2.8*6m	2.8	6	36.92	4-10	700-750	25-35	11x2
3.0*6m	3	6	42.39	4-10	700-750	30-40	7.5x4
3.0*7m	3	7	49.45	4-10	700-750	30-45	7.5x4
3.2*7m	3.2	7	56.27	4-10	700-750	35-55	11x4
3.6*8m	3.6	8	81.39	4-10	700-750	55-75	18.5x4
4.0*10m	4	10	125.60	4-10	700-750	70-100	22x4

 

Application

Wide application performance:
Powder & particle:Sands,mineral filter cake,clay,filter cakes,fly ash coal,limestone,iron sulphate,stones,gypsum etc.
Damp and sticky material:Coal slime,bentonite,sewage sludge,Kaolin etc.
Corrosive material:Distillers grains,animal dung,Fertilizer,slag etc.
Biomass material:Sawdust,wood chips etc.

 

Working principle

 1.The wet materials are first evenly sent to the belt conveyor through the feeder, and then enter the dryer through the conveyor belt.

2.The heat generated by the fuel combustion in the hot blast furnace enters the main machine under the action of the exhaust fan and comes into contact with the materials, completing heat transfer and quickly evaporating water.

3.The three-cylinder dryer has a three-pass sealed structure, which can reduce heat loss and improve thermal efficiency. The dried material is transported to the linear vibrating screen for screening, and then sent by the elevator to the storage tank for storage or packaging.

4.The upper part of the hopper is used to discharge dust and other materials during the process. After being processed by the dust removal system, environmental protection can be achieved.

Company Profile

Baichy headquarters is located in the industrial park in Jiaozuo City. It covers a total area of 200,000 square meters, including 150,000 square meters of standardized workshops. There are more than 200 sets of various large and medium-sized metal processing lathes, riveting machines, welding equipment, and assembly equipment. We have more than 500 workers, including more than 20 middle and senior technicians.    Baichy is mainly focused on 4 series of products: stone crusher machines, sand-making equipment, powder grinding mills, mineral processing equipment, and their spare parts.    Every year, Baichy can turn out 1,000 sets of crushers and 10,000 tons of crusher parts.

 

 

 

Through the international mining machinery exhibitions, We have demonstrated our professional equipment, technology, and thoughtful service to customers from all over the world.

FAQ

1. Are you a manufacturing or trading company?
We are a factory, established in 2003.

2. How long is your delivery time?
7-10 days for the stock, 15-30 days for the mass production.

3. What is your payment method?
30% deposit in T/T advance, 70% balance before shipment.

4. How long is the warranty? Does your company supply the spare parts?
One year. Spare parts for you at the lowest cost.

5. If I need the complete crushing plant can you help us to build it?
Yes, we can help you set up a complete production line and give you related professional advice. We had already built many mining projects in China & Overseas.